28.10.2020

Router Snr-Cpe-W4N

snrcpew4nm

Wireless Router SNR-CPE-W4n rev. M allows you to connect up to 4 devices in the apartment using wired communication lines at speeds up to 100 Mbit / s, provides work with wireless devices (Wi-Fi).

Advantages:

High performance. Easy configuration interface. IPv6 support.

Contents of delivery:

Router SNR-CPE-W4n rev. M-Patch Cord-Power Adapter DC 12V, 1A-User Manual.

Attention! Using a power source with other characteristics may result in malfunction of the device and loss of warranty.

Router firmware update

Before you start using the router, make sure that the latest version of software (firmware) is installed in it in the following way:

Launch an Internet browser on your computer and go to the address, enter the management interface of the router using the Admin name and Admin password. If you didn’t succeed in entering the management interface, there are recommendations for fixing connection problems. If there are updates, a message will appear asking you to update the firmware to the new version. Click Download and install to update. If there are no updates, the Router Management section displays information about the current firmware version:

Attention! Do not turn off the power of the router until the update procedure is complete!

change Password

To change the factory password on the settings page in the “Router Management” section, replace the factory default Admin password with a more complex one. A secure password must contain at least 8 characters, including Latin lowercase and uppercase letters and numbers. Save the new password by clicking the Apply button.

Wireless Setup

Attention! For security reasons, we recommend that you change the preset network name and password for accessing the wireless network.

To change the details of the wireless connection to the router, you must specify the name of your network in the “Wireless Network Settings” section and enter the password to connect to it. So that the name of your network does not coincide with the name of your neighbor’s network, we recommend using your contract number as the name. A secure password must contain at least 8 characters, including Latin lowercase and uppercase letters and numbers. Save the settings by clicking the Apply button.

Leave a Reply

Your email address will not be published. Required fields are marked *