05.12.2020

How to Install a Router

Step 1 Open a web browser and enter the IP address of your device in the address bar (default is 192.168.1.1), press Enter.

Step 2 Enter the username and password on the login page, the default username and password is admin, click OK to enter the device.

Step 3 Click Quick Start at the top.

Step 4 Press RUN WIZARD and press NEXT (NEXT) to configure the ADSL router.

Step 5 You can change the password for the administrator account if you specify a new password. If you do not want to change it, enter the default password and press NEXT.

Step 6 Select the correct Time Zone (time zone) and press NEXT.

Step 7 Select PPPoE / PPPoA and press NEXT.

Step 8 Enter the username and password provided by your ISP. Indicate the correct VPI and VCI values, which are also provided by your Internet service provider. Press NEXT.

Step 9 If your ADSL router supports the wireless feature and you want to connect to it wirelessly, set the Access Point Activated and security settings. Here, as an example, we consider WPA-PSK, TKIP / AES. Enter the key and press NEXT.

Leave a Reply

Your email address will not be published. Required fields are marked *