06.07.2020

Optical Port Switches

A 9-port unmanaged Gigabit Ethernet switch is used to connect various network devices at speeds up to 1000 Mbps. The switch is equipped with 8 x SFP-slots (1000 Base-FX) and 1 x RJ-45 (10/100 / 1000Base-T). The SF-G1018 switch is recommended to be used in cases when it is necessary to combine several network devices (IP cameras, IP phones, etc.) into one network. In this case, the devices can be interconnected, both with an optical cable and a twisted pair cable. To connect devices using an optical cable, you need to purchase an additional optical SFP module. To connect devices using a twisted pair cable, you need an SFP module with an RJ-45 interface.

Brief technical specifications:

Ports: 1 x GE (10/100 / 1000Base-T), 8 x GE SFP (1000Base-FX) Power Supply: DC5V (2A) PSU included

Unmanaged gigabit switch SF-G1022 is designed to transfer data between various network devices (maximum – 2 connections). The switch is equipped with two SFP-slots for installing SFP-modules (not supplied, purchased separately), which will allow you to connect the switches to the network using optical fiber over a distance of several kilometers.

Switch ports: 2xGE RJ45 + 2xGE SFP Standards support: 10/100 / 1000Base-T, 1000Base-SX / LX Switching capacity: 12 Gbit / s MAC address table size: 1K Industrial design in metal case

Unmanaged gigabit switch SF-G1042 is designed to transfer data between various network devices (maximum – 4 connections). The switch is equipped with two SFP-slots for installing SFP-modules (not supplied, purchased separately), which will allow you to connect the switches to the network using optical fiber over a distance of several kilometers.

Switch Ports: 4xGE RJ45 + 2xGE SFP Standards Support: 10/100 / 1000Base-T, 1000Base-SX / LX

Leave a Reply

Your email address will not be published. Required fields are marked *